7. B I N G T Y P E 1 8, 1 7, and 1 5
12 or 14mm clamp size 23mm
Steyr-Daimler-Puch was so proud of the replacement for the Maxi, that they named it after their hand crafted performance bicycle line, and their 1899-1934 Austrian automobile name, Austro-Daimler. Not much on the 1984-86 Puch A-D was the same as the elderly Maxi. These Bing “Type 18” 12mm carburetors (18/12/206 and 18/12/207) are 1990’s technology. Notice the light throttle spring, possible with modern nylon lined cables and low friction throttle parts.
A Bing “Type 18” 14mm carb (18/14/180) was also on the 1995-96 Manet-Puch Korado.
A Bing “Type 17” is like a Type 18, but the float needle is different.
A Bing “Type 15” is the same as “Type 18”, except it has a 55mm bell in front, for an air box.
# qty Puch part # price description a is A-D k is Korado
0 1 000.000.0000 N/A carb 15/12/100S
1a 1 345.415.6000 N/A carb 18/12/107 Puch A-D 2.0hp
1a 1 345.315.6000 N/A carb 18/12/106 Puch A-D 1.5hp
1 1 000.000.0000 N/A carb 18/12/118
1 1 000.000.0000 N/A carb 18/14/104 Zundapp CS,CX
1k 1 0000.000.01k N/A carb 18/14/180 Manet Korado 2.0hp
2k 1 0000.000.02k N/A choke cable adjuster M7-0.75
2a 1 321.215.4181 $12.0 choke elbow M7-0.75 Bing Sachs 12
2a1 1 321.115.4211 N/A rubber boot
2a2 1 000.000.0000 $5.00 cable adjuster M6-0.75
2a3 1 000.000.0000 $2.50 adjuster nut M6-0.75
3k 1 0000.000.03k N/A throttle cable adjuster M7-0.75
3a1 1 321.115.4181 $8.00 throttle cable pipe elbow smooth
3a1 1 321.115.4171 $1.00 pipe elbow nut M7-0.75
3a2 1 000.000.0000 $5.00 cable adjuster M6-0.75
3a3 1 000.000.0000 $2.50 adjuster nut M6-0.75
4 2 000.900.9114 $1.00 top screw M4 x 12 phillips
5k 1 0000.000.05k N/A top cover, both threaded M7-0.75
5a 1 321.115.4191 N/A top cover, choke threaded M7-0.75
6 1 321.115.4291 N/A top gasket
7 1 321.115.4061 N/A throttle spring Ø13 x ??
8 1 321.115.4141 N/A spring cup has nylon slide tab
9 1 362.115.0131 $2.00 jet needle clip Bing Puch 5
10 1 330.115.0161 $18.0 jet needle 36mm Bing Puch 4a
11 1 ..115.4151/13 N/A throttle slide Ø16.5 diff. slot angle
12 1 321.115.4641 N/A choke spring
13 1 321.115.4652 N/A choke slide
14 1 000.900.9114 $0.70 inlet screw M4-0.7 x 16
15 1 321.115.4391 N/A seal washer 4 x 8 x 0.5
16 1 321.115.4381 N/A inlet banjo (bigger)
17 1 321.115.4371 N/A fuel filter
18k1 0000.000.18k N/A idle mixture screw o-ring
19k1 0000.000.19k N/A idle mixture screw
20 1 321.115.4121 N/A idle speed screw spring
21 1 321.115.4111 N/A idle speed screw
22 1 345.115.5291 $3.00 clamp screw M6 Bing Puch 28
23 1 321.115.4071 N/A o-ring for needle jet
24k 0000.000.24k N/A pilot jet
25 1 ..115.4081/26 N/A needle jet 2.26
26 1 ..315/0091/54 none 4.0 main jet #54 (2.0hp)
26 1 ..315.0091/52 $8.00 4.0 main jet #52 (1.5hp)
29 3 D07.985.0212 $0.50 bowl screw M4 x 16 phillips
30 1 000.900.9886 N/A air filter hose clamp
31 1 321.215.4281 $12.0 float bowl gasket
32 1 362.215.0262 $15.0 float needle Bing Puch 20
33 1 321.115.4252 N/A float 35 x 26 x 15.5
34 1 321.115.4271 $3.00 hinge pin Ø2.5 x 25
35 1 321.115.4242 N/A float bowl 3-screw for Puch A-D, Korado
36 1 000.000.0000 N/A float bowl 3-screw with choke jet
Bing 18/14/180 on Manet-Puch Korado
Bing 18/12/118 carb
Bing 18/12/118 carb
Bing 17/14/122 on 1979 KTM (Canada model)
This Bing type 17 from a 1979 KTM has a float needle with a wire “tail” that hooks onto the float. Later Bing type 18 had a regular float needle like on most 1970’s Bings, with a “flat top” that the float both pushes and pulls. The Bing 17 and 18 floats are the same. The Bing 18 float needle works fine on a Bing 17. Bing 18 is a later version from the mid-1980’s.