Identification
1. Morini MO1, 2. Morini MO2, 3. Morini M1
Cables for Sale
These are single-ended bare cables. The inner wire can slide out and be replaced separately. The specification is conduit length x total length in inches.
’77-80 Pacer Deluxe Morini MO1 or M1 engine:
rear brake ∅1.5 61 x 67″ $10 6mm mushroom end
front brake ∅1.5 41 x 48″ $10 6mm mushroom end
throttle ∅1.2 38 x 47″ $10 3 x 5 mm inline end
start cable ∅1.5 44 x 50″ $10 6mm mushroom end
’77-80 Pacer Sport and Super Sport Morini MO1 or M1:
rrear brake ∅1.5 59 x 65″ $10 6mm mushroom end
front brake ∅1.5 39 x 46″ $10 6mm mushroom end
throttle ∅1.2 36 x 45″ $10 3 x 5 mm inline end
start cable ∅1.5 42 x 48″ $10 6mm mushroom end
’77-78 Pacer Sport and Super Sport Morini MO2 engine:
rear brake ∅1.5 59 x 65″ $10 6mm mushroom end
front brake ∅1.5 39 x 46″ $10 6mm mushroom end
throttle ∅1.2 36 x 45″ $10 3 x 5 mm inline end
start cable ∅1.2 44 x 50″ $10 4 x 5 mm inline end
start cable ∅1.2 44 x 50″ $10 requires D14p pinch bolt in lever
Morini MO1 and M1 Start Cable
The original start cable conduit stops at, and moves with the start lever, while the inner cable end is fixed to the engine. This is the opposite way most cables are attached. Usually the conduit stops on the engine and the inner wire attaches to and moves with the start lever. The cable is single ended, so it can slide out of the conduit and be replaced separately.
for Franco Morini MO1 and M1 engines
H77 $10.0 start cable forward-pull 43 x 50″ ∅1.5
H00.0 $00.0 sold separately:
P8 $2.00 pinch bolt a
D14b $4.00 cable anchor c with centering washer b
D14b $4.00 cable anchor c with centering washer b
A2a $3.00 cable adjuster d
Morini MO2 Start Cable:
for Franco Morini MO2 engines
12.7061 none start inner wire 2-sp 55″ ∅1.6 requires D14p
12.606I $5.00 replacement inner wire 50″ ∅1.2 requires D14p
12.706S $11.0 replacement cable 43 x 50″ ∅1.2 requires D14p
H00.0 $00.0 sold separately:
D14P none pinch bolt ∅8 x 17 with centering grooves
P8g $5.00 pinch bolt ∅8 x 15 no grooves
