A35. 16x1.5 female side mount
A35 Indian 16×1.5 side-mount Not Available
A turnbuckle nut none M16-1.5 R and L
B outer seal ring none 12 x 16 x 2
Bs B substutute $5.00 10 x 16 x 1
C valve body xxx none 20.9 ID
D trap filter disk none 19 x 1.5
E trap seal ring x none 15 x 19 x 2
F trap cup xxxxx $5.00 M20-1.0 thread (Trac Eagle)
G seal disk xxxx $11.0 20.5 x 3.25 4-hole D10
H handle plate x none 21.3 OD
I wave washer (2) none 20 x 16 x 0.3
J face plate xxxx none 17 ID
K face screw (2) $1.50 M3 x 6
A35 is an original Indian 16×1.5 side mount, made in Taiwan. All 3 rubber seals have decomposed.
The 2 seal rings do not normally leak if they are undisturbed, but the seal disk does. There are two ways the seal disk can leak.
1) It can keep supplying the carburetor with gasoline when in the OFF position. This leak can be stopped temporarily by pinching the fuel hose with a small vise grip or C clamp.
2) It can leak gasoline outside of the valve when the handle is in any position. Other things besides the seal disk can cause this kind of leak. Some of those things are: improper assembly, damaged handle plate, missing wave washer, damaged valve body, pieces of the old seal disk still stuck to the valve body sealing surface.
Outer seal ring: The 17mm substitute outer seal ring sits in a 16 mm groove. But it has to fold to pass over 14.5 mm thread tops on its way in, Once in it can be unfolded and does fit, but tightly.